|
|
|
Affordable, easy to use and virtually maintenance-free:
The Eye Com Plain Paper Reader/Printer 9000. . . the
choice is clean & simple.
|
The user-replaceable toner cartridge houses all key printing components in one unit. Each time you replace it, it's like getting a whole new machine.
The compact RP 9000 cartridge system has virtually eliminated the need for maintenance. No messy toners or developers to replace, and say goodbye to expensive service calls. The RP cartridge system lets you take care of set-up and routine maintenance that once required a trained service technician.
Lightweight and compact, the RP 9000 was designed to easily fit into any work station. It sets up in a matter of minuets and its "clamshell" design makes the cartridge system easily accessible -- you never need to move the machine!
|
|
|
Convenience and Versatility - All controls are front-mounted below the screen, easy to get at, clearly visible and simple to use. Slide-in lenses are quickly changed and available in a wide range of magnifications. The prism lens for source document applications rotates the image for printing. Our long life illumination lamps an average of 1,000 hours, making frequent replacement unnecessary. The built-in microcomputer informs the user of any trouble by self-diagnosis codes on an LED display.
|
Specifications:
Type: Desktop type reader/printer
Print Process: RP cartridge system, single component
dry toner projection development system
Film: Built-in 4" x 6" (105mm x 148mm)
microfiche, jackets, automatic opening
Indexing: Interchangeable index grids
Screen: 8-5/8" high x 11-13/16" wide (220mm x 300mm)
rear projection type with cursor
Magnification Lens: Slide-in lenses - 19x, 29x, 33x, 35.5x, 54x,
*23.5x, *41x, *47x, *Prism lens for source fiche,
75% blowback COM, 100% blowback source document
Image Rotation: By prism lens
Print size: A4, 8-1/4" x 11-11/16" (210mm x 297mm) and/or
Letter 8-1/2" x 11" (216mm x 279mm)
Paper Feeding: 50 sheet stack automatic feeding system
Warm-up Time 24 Seconds
Print Speed 4 prints per minute
Multiprint: Preset 1 to 9, or "F" mode for continuous
printing of up to 50 copies from feeder tray
Density Control: Manual
Consumables: RP Cartridge 20N - Yield 2,500
Light Source: 17V 60W Halogen lamp (average 1,000 hours life)
Warning System: Self diagnosis with LED indication
Electrical: 120V 60Hz, 1.0kW
Dimensions: 22-3/8" high x 18" wide x 28-1/8" deep
(568mm x 457mm x 715mm)
Weight: 62 lbs. (28Kg)
Environment: 50 to 90 degrees F (10 to 32.5 C); 10 to 80% R.H.
Optional: Roll Carrier, Dustcover, Electrical Masking, Coin
Box, Light Shield, Custom Lenses, Work Station
Specifications subject to change without notice
 |
